B&M SHORT SHIFTERS

The B&M EDGE Shifter

Direct bolt-in for your stock Honda or Acura shifter, works with factory knob and most aftermarket units. Reduces shift throw by over 2". Features counter-balanced bottom end for more precise shifts. Special, long-lasting high performance silicone bushings for the smoothest shifts possible! CNC Billet steel shaft and highly polished chrome finish.

The B&M PRO-EDGE Shifter

The Pro Edge racing shifter was the natural evolution of the popular Edge line of shifters. Working with some of the top import racers, B&M's engineers took what they learned in the real-world racing environment and designed a professional level shifter system. By keeping the key features that has made the Edge such a success (such as counterbalanced bottom end) and incorporating a billet aluminum bearing mount (with a trick aerospace polymer spherical bearing), the Pro Edge has become the professional's choice. The CNC machined stick has also been
upgraded to 303 billet stainless steel!

B&M EDGE Short Shifting System

The B&M Edge Short Shifting System shift adapter is CNC machined from aerospace quality 6061-T6 aluminum and allows the user to reduce shift throw by over 25%! It is equipped with a true roller bearing at pivot point for precise shifts. Another innovation not found in other shift adapters is the "neutral adjustment" (45062 & 45063 Only)- this allows the user to custom fit the shifter for a more natural feel.

45063	45074	45076
45064	45075	45077
	45079

B&M FUEL MANAGEMENT

The CommandFlo is a billet aluminum fuel flow modifier. This unit is designed specifically for Hondas, Acuras and Mitsubishi Eclipses. The CommandFlo allows modification of the fuel flow rate to properly tune the air/fuel ratio. Ideal for use with free flow intakes and exhaust systems. The CommandFlo offers these special features: Bolt-on adjustable modifier for stock fuel regulators, 6061-T6 billet aluminum case, CNC machined, allows pressure adjustments from 25-60 psi.

The Fuel Pressure Gauge Set allows the user to accurately measure fuel pressure. Proper fuel pressure is critical at wide open throttle to prevent lean conditions. Recommended to be used with the B&M CommandFlo fuel flow modifier.

Fuel Pressure Gauge	CommandFlo Fuel Modifier

POWER REGULATION

The New Volt coil power unit is designed to produce increased spark intensity on inductive ignition systems. The New Volt is connected in series with the positive side of the coil, which means it will also work with coil packs or multiple coil systems. Since the ignition coil is the heart of the ignition system, increasing the voltage to the coil will vastly improve the spark performance with either a stock or aftermarket coil. It will deliver 20 volts to the coil even if the battery voltage is below 12 volts, making this ideal for racing without an alternator. The fully epoxy encapsulated electronics will provide trouble free life, even in the harshest environment. Ideal for racing, street performance and RVs.

• Works with multi-coil applications as well as single coil applications with one unit.
• State-of-the-art internal power regulation, output remains at 18 or 20 volts and up to 20 amps even when input voltage drops below 12 volts - ideal for racing applications where no alternator is used
• Harness connector feature.

B&M OIL COOLER

Import engine oil cooler most imports with 20mm x 1.5 or 3/4"-16 oil filter threads