AEM X-Series Digital Wideband Controller Gauge Kit part number 30-0300. The Kit comes complete with: (1) 2-1/16in. UEGO Gauge Assembly with Black Face and Bezel, (1) UEGO Sensor, (1) O2 Sensor Weld Bung, (4) Butt Connectors, (1) QR Code sheet (which links to downloadable instruction sheet), (1) 4 Lead Harness, (1) UEGO Sensor Harness.
Overview:
AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patent-pending X-Digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband UEGO air/fuel controllers*.
The X-Series Wideband UEGO AFR Sensor Controller Gauge (PN 30-0300) measures 2 1/16th-inch (52mm) in diameter, and features a modern, visually striking faceplate and new seven-segment center display that is 87% larger than the 30-4110 AEM Wideband Gauge’s center display. This creates the perception of a larger overall gauge, but in a common 52mm size for easy mounting. Its slim depth (less than one inch overall) and ultra slim cup depth of .200-inches dramatically increases its application base and potential mounting locations.
The X-Series Wideband UEGO AFR Gauge has a user configurable display via buttons on the gauge face that allow you to change AFR values for different fuels, Lambda or O2%, change the center display to three or four digits, perform a free-air calibration if desired as the sensor ages, and change the CAN message ID when linking multiple X-Series Inline Controllers or X-Series Controller Gauges. A black bezel and black dual-faced faceplate for air/fuel and Lambda are included, and an optional silver bezel with white dual-faced air/fuel and Lambda faceplate is available (PN 30-0300-ACC, sold separately). An Auto Dimming feature is included. Locking connectors ensure a positive connection between the harnesses and gauge and a new single board design adds to the new gauge’s durability.
The gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging. AEMnet allows additional X-Series Wideband Controllers to be daisy chained together (up to 16 cylinders) for recording AFR in multiple cylinders. It supports vehicle/system voltages up to 16V, and can be used on EFI or carbureted applications, and dynamometers in applications using gasoline, methanol, ethanol, propane and CNG.
Features:
-X-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitor wideband AFR controllers
-Includes wideband UEGO sensor
-Factory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires
-Compatible with vehicle/system voltages up to 16V
-0-5V & RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders
-Can display AFR values in hundredths of %
-52mm gauge diameter and slim 0.825” gauge depth
-Gauge cup depth only .200” deep!
-Auto dimming feature
-User configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, and 3- or 4-digit display
-Black bezel and black dual faced faceplate included (gauge only, silver bezel/white gauge option sold separately, see PN 30-0300-ACC)
-Locking connectors
Specs:
-Display Gasoline values from 8.0:1 to 20.0:1 AFR
-Display Lambda values from .55 to 2.00
-0-5V Output Gasoline values from 8.5:1 to 18.0:1 AFR
-CANbus Output Gasoline values from 8.0:1 to 20.0:1 AFR
-CANbus Output Lambda values from .55 to 2.00
-0-5V Output Lambda values from .58 to 1.23
-0-5V Output E85 values from 5.7:1 to 12.0:1 AFR
-0-5V Output Ethanol values from 5.2:1 to 11.0:1 AFR
-0-5V Output Methanol values from 3.75:1 to 8.0:1 AFR